Special-shaped components are the most common customized structural and decorative parts in modern wood furniture manufacturing. Before the widespread application of automatic and CNC machining equipment, furniture factories relied on mature conventional woodworking processes to produce various irregular and profiled furniture parts. Traditional machining features stable operation, low equipment cost and strong adaptability for small-batch […]
Category Archives: Woodworking Machine Tips
tips for woodworking machine selection and usage
Woodworking Accessories Tips, Woodworking Machine Tips
The Ultimate Edge Banding Machine Maintenance Guide: Secrets to Boost HOMAG Equipment Lifespan by 50%!
22
Oct
Oct
Gluing system 1. Lubricate the glue roller bearings every two days with high-temperature oil (HOMAG part number 4-017-02-0010) 2. Clean the glue unit monthly (do not use sharp-edged tools for cleaning). 3. Clean the drive joint shaft every 6 weeks.
2. Heating problem 1. The edge banding machine is not heated enough. Solution: Check whether the heating device is working properly, check whether the power supply of the heater is normal, check whether the power cord is damaged. If all of the above are normal, the heater needs to be replaced. 2. The edge banding […]
When using a plane, gestures are very important. The two index fingers should be placed on both sides of the planer, and the two thumbs should be placed on the back of the planing hand to facilitate the application of force and prevent the wood from scratching the fingers. 2.When applying force, make sure that […]
Honeycomb panel is a sheet made of two thinner panels glued on both sides of a honeycomb core material. The honeycomb core material can be made of kraft paper, aluminum sheet, surface impregnated with synthetic resin (phenolic, polyester, etc.)
Reciprocating Saw Operate And Maintenance Tips
English
Español
العربية
Русский
Français
Português do Brasil
简体中文